Towing twins help
I'm looking to get a set of towing twins. What's the best? No lag wanted
---AutoMerged DoublePost--- Any info greatly appreciated. |
compounds will spool slower than a properly sized single.
|
^^^^ turbo2332 is right. But if your determined try dieselpowersource. They have decent setups and really good prices compared to ATS, II, and BD
Sent from my XT1030 using Tapatalk ---AutoMerged DoublePost--- What's your HP goal BTW? Sent from my XT1030 using Tapatalk |
he only wants 450-500hp and i think he already bought a set. its his money to blow.
|
Hey if you have the money then so be it lol
Sent from my XT1030 using Tapatalk |
Ok correct me if I'm wrong. A single charger that is capable of cooling egts on a 500hp truck will not spool fast enough at lower rpm's. I don't want to have to wait to 1800rpm to have usable boost. II told me that a phatshaft 62 has usable boost at 1750rpm.
|
It depends on what the exhaust housing size is a12cm housing will spool faster then a 14cm. What were the numbers of the turbo they were talking about?. If you do go twins for 500hp go a 62 with a 12 cm housing and a s475. That should be more then enough.
Sent from my XT1030 using Tapatalk |
I have ordered the bd towing twins. I didn't want to go too big. I don't need any room to grow. This setup is good for 575rwhp so they say. That's plenty for me. If I went higher than that I would have to change clutch, flow the pump, and bigger injectors.
|
Yea. Sounds good what that run you if you don't mind me asking
Sent from my XT1030 using Tapatalk |
All times are GMT -5. The time now is 05:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands