4400 engine budget
 

My truck has 4k gsk 60lb head springs built tranny bhaf 4 inch exhaust If you had a 4400 dollar budget what would you do next to the engine

Delivery valves, injectors, turbo.

Head studs, lift pump, and some turbos

What turbos / injectors /lift pump what head studs will o rings be needed lets get more specific

How about YOU get more specific first. What exactly are you doing with this truck, and what are your overall goals? Quite frankly, if I had that setup, that money, and was just daily driving it...I'd put the cash in my pocket to pay for fuel and drive it until the tires were bald.

However, if you are building for power (pulling, racing, buttcheek-dyno, stoplight warrior...) then set an overall power goal and REINFORCE the powerplant to MAINTAIN that goal. Bear in mind that it's a snowball effect too...

As for my chip in for your spending, I'm with 94 12valve...stud it, get a good lift pump and maybe a modified overflow valve to go with it, and invest in a good turbo to keep it cool and clean as you turn the pump up. Also, gauges and KDP fix, if they haven't already...and tune the AFC, but that's more or less free.

Sorry my kdp is tabbed my drive train is built i just want something I can take down the street to the track when I want I have a couple buddy's with built trucks so I'm trying to keep up with them and I'm shooting for around 550hp for know and my tires aren't far from being bald :humm: I know I'll need studs and air dog been looking at the 62 silver or 63 screaming eagle would either of these be street friendly if so what injectors or Dvs should be paired up with either one

---AutoMerged DoublePost---

And sorry but snow ball effect so are u refuring to I haft to reinforce everything not just one part

I'd do this setup, with studs and o-rings.
500hp 12-valve recipe | What's New Blog & Discussion at Diesel Power Magazine