School me on Turbos !!
~ Looking to be Schooled on Turbos ~
Okay, well I thought I knew a little about turbos. Then, the more I searched and read about them, I found out I didn't know enough. I just ordered 2pc. Exhaust Manifold and was thinking of upgrading my Turbo while in there, but dont know what I have on my STOCK 06 Dodge 3500 Mega 4x4. Lets start... 1) When they say t4 or t3, what does this mean ? Does this mean the ports on where it mounts to the manifold or just simply mount options ? 2) What Turbo (brand) comes stock on a 06 Dodge 3500 Mega ? What (mm) impeller are stock to know what to upgrade ,too ? Any input ? 3) One or Divided ? What does this mean and which should I go with ? Any help and input is appreciated... :tu: |
3 Attachment(s)
Originally Posted by FirehouseSmoker
(Post 877550)
~ Looking to be Schooled on Turbos ~
Okay, well I thought I knew a little about turbos. Then, the more I searched and read about them, I found out I didn't know enough. I just ordered 2pc. Exhaust Manifold and was thinking of upgrading my Turbo while in there, but dont know what I have on my STOCK 06 Dodge 3500 Mega 4x4. Lets start... 1) When they say t4 or t3, what does this mean ? Does this mean the ports on where it mounts to the manifold or just simply mount options ? 2) What Turbo (brand) comes stock on a 06 Dodge 3500 Mega ? What (mm) impeller are stock to know what to upgrade ,too ? Any input ? 3) One or Divided ? What does this mean and which should I go with ? Any help and input is appreciated... :tu: 1) see picture below.... 2) Holset HE351CW I believe 3) One big housing vs a divided housing. Divided should spool quicker. Also it is recommended to use a divided manifold with a divided hosing and not to mix and match. (see pic below) |
2) The he351cw has a 60mm compressor wheel, if I am not mistaken. How much fuel are you running? Tuning? Injectors? You need to match your turbo to your fueling.
|
Thanks H.R.D.! That info is what I was looking for. As far as gauges go, the truck has none for Boost, Fuel/Air, ect., but they are on the way. Truck was stock when I bought it used, but after a few Mods, it will be a pretty nice truck. Thanks for your input :tu:
|
Glad to help my friend.
:c: |
Your he351 measures 60/60/ with a 9cm housing.
|
Actual is 60/58/9cm
|
Either way, we still need to know what he has done/plans to do on fueling to determine what size he needs to upgrade to.
|
Originally Posted by CHEMMINS
(Post 878432)
Actual is 60/58/9cm
|
My wife said 2mm was a lot.......:scare2:
|
All times are GMT -5. The time now is 06:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands