Transfer case output / driveshaft...
Crawled under the truck while doing some maintenance this weekend and noticed that the dust cover at the transfer case output is cracked. Looks like it just got a little old and dry. Is this an issue? Looks like it would be rather difficult to replace due to the vibration dampner and yoke. Should I just goop some rtv on it to help keep it somewhat sealed, or let it continue to degrade? Can it be replaced? Any info would be helpful. Thanks!
|
If it is leaking, Id dab some RTV on it, but indefinably plan on replacing the seal. I bought one for a smaller 241 t-case a while back, it was around $25 for that thing, it might be a little more since the 271/273 is a bigger seal, but definitely replace it if you have the time.
|
It's not the rear seal on the transfer case it is the dust cover for the rear seal where the yoke goes to the driveshaft. If it was leaking I would have to replace the rear seal, but I'm not sure how vital this dust cover/seal is? Thanks for the reply!!
|
All times are GMT -5. The time now is 12:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands