Cp3 upgrade
 

Will a arson competition kit fuel f1 flux 4 or 5 injectors

ask buddy at wicked diesels ,,with the mods you have you may want to send him your cp3 and get it built....jmo

better get duals, arson kit wont keep up and even a single 85% pump wont keep your r.p. up with 200 horse injectors

Ya thats what i was thinking, just tryin to budget things i was thinking if i could get away with a big single for a little bit then upgrade to dual later

What Turbo are you going to run with 200s?

Luke

I had the same idea but the 85% cp3 couldnt keep up even with a mp8 cranked up. 5th and 6th at wot would pull rail press. down bad. I used to hate the idea of duals, wanted a single to keep things appearing stock but, duals were the only answer. The setup I run now lets me keep r.p. setting on smarty at stock level. Its nice not having a crazy ramp rate. I dont worry about cracked injector bodies like I used to.

The arson comp kit is not for DDing either.

I currently have a super phat shaft 66, what turbo would you recommend? it wont get driven much on the street just maybe once a week or so, mainly want to pull

id stick with the 66 or at least a version of it. 2.6 class is expensive, id hate to know how much money it takes to be competitive in a 3.0 or unlimited class

thats what i was planning on doing, i can get 60lbs of boost with it it just does not spool good but with injectors other mods it will light quicker