Free/Cheap Mods?
anybody got some ideas for free or cheap stuff i can do my truck? im off of work for two weeks and im gonna get really bored
|
Replace the intake baffle with a piece of pipe.
|
What size pipe and what kind??
|
I think its 6" exhaust tube to replace the center section. Or you can just gut the stock piece for free.
|
|
What size pipe and what kind?? |
I've seen some of you dodge guys use flexible Dryer duct. Man that looks SWEET!
|
intake baffle, silncer ring, swiss cheese the airbox, gut the cat, straight pipe exhaust... should sound niiicceee
|
Wouldnt cutting a 4" hole in the bottom of the air box ands running the ducting do the same as swiss cheesing it?
Just curious. |
Yes, but with the ducting to the bottom of the fender you them have a cold air intake.
|
Dont forget that Cardboard "Heat Shield" 15+ H.P. on the dyno!
|
i need to make a heat shield for my intake
|
Put a ziptie on the radiator overflow tube next to the cap to keep it from leaking:dm:
|
Whitmore, you have my vote for favorite avatar of all time.....
|
1 Attachment(s)
That was some footage I took when I was in question of if I needed new shocks or not :U:
click for animation |
that is the greatest avatar ever
|
I cut a 4" hole in the bottom on my stock airbox. Screwed in a Dryer hose adapter that vents to the outside of the house. Then attached a dryer hose to the bottom of the fenderwell and secured using tie wraps. Also attached a 4" stove pipe bend to the bottom of the hose. Instant ram air effect.
|
how do you gut the cat? Without taking it to the muffler shop. Sorry for the stupid ? but if anyone has a vid on it i'm interested. thanks
|
Originally Posted by Diesel-N-Dust
(Post 94606)
Dont forget that Cardboard "Heat Shield" 15+ H.P. on the dyno!
please elaborate. do you put in front of the radiator? I thought that was just to get heat faster in the wintertime. ---AutoMerged DoublePost--- what about the vent mod on the fuel tank |
Originally Posted by Super Dave
(Post 94801)
Put a ziptie on the radiator overflow tube next to the cap to keep it from leaking:dm:
|
isnt there anything fuel related that is free turning up the fuel pump anything to pump my truck up with some more fuel
|
this is on third gens in this thread, on a 24 valve, there aint anyway to get more fuel for free, just like on the 3rd gens.
|
you can only turn up the pumps on 2nd gen and 1st gen. 3rd and up are all computer controlled need a programmer to turn up your pump
|
only 12 valve 2nd gens, the 24valve vp44 is a second gen, requires programmer or downloader
|
Originally Posted by biged681985
(Post 379400)
only 12 valve 2nd gens, the 24valve vp44 is a second gen, requires programmer or downloader
|
anything
is there anything i can do i just cant swing the programer rite now i have propane and cold air is there anything at all that doesnt involve computer junk
|
chris try posting and searching in here
24v bombs |
You could replace the airbox to turbo section (after the curve from airbox before the turbo) straight section with a 5 inch pvc and get rid of the baffled stock piece use two large clamps and don't overtighten. You can really hear the difference after doing this less than a dollar mod. 5 in pvc hard to get from plumber not too common but is available and that is tube size you need.
|
All times are GMT -5. The time now is 06:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands