Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9 Liter CR Dodge Cummins 03-07 (https://www.dieselbombers.com/5-9-liter-cr-dodge-cummins-03-07/)
-   -   Can exhaust manifold gaskets be reused??? (https://www.dieselbombers.com/5-9-liter-cr-dodge-cummins-03-07/3528-can-exhaust-manifold-gaskets-reused.html)

steved 07-19-2007 08:00 PM

Can exhaust manifold gaskets be reused???
 
Yes/No???

steved

06 DIESEL 07-19-2007 08:12 PM

I have never reused one but you might be able to, depends on the condition of it when it comes off.

Longhorn 07-19-2007 09:33 PM

I agree, you MIGHT be able to, but my experience with gas engines says that you should replace them. I agree with what 06 said above, the condition would determine, but likely best to replace.

saab9k 07-19-2007 09:36 PM


Originally Posted by steved (Post 39149)
Yes/No???

steved


sure they can, but they might not seal, but anyway to save a $.

steved 07-19-2007 09:52 PM

So everyone that installs a pyro replaces the gaskets????? I've read both ways...don't get me wrong, I always replaced the exhaust manifold gaskets in a gasser, but several threads indicated reusing them...just wasn't sure...

I'm not wanting to drill my manifold because I have a second one that's already drilled...keep mine for good.

And the set we got from DCX was $13/gasket...pretty pricey for 6 gaskets. Guess I'll need to call Cummins...

steved

Longhorn 07-19-2007 09:57 PM

NO.....some of us install it after the turbo and always have, always will....


Yea, I know, let the flaming begin, its supposed to alter your reading by a few hundred degrees, but for the extra ease, and no filings or gaskets to worry about, I can do the math...:lol:

Uncle Bubba 07-19-2007 11:18 PM

You can order the Isspro color coded guages for either pre or post turbo. It does the math for you. I just installed new manifold a few months back and I didn't pay as much for all the gasket's needed as your talkin just the exhaust ones. I got em thru Cummins but I don't remember a price on em. I know I got all the gaskets and new bolts for this project for under $60.

Longhorn 07-19-2007 11:28 PM

Pre and post turbo gauges???? What next???? Thanks Bubba, I honestly didnt know that!! I generally run the Attitude, so I have never had the gauges, but this is great info!!!

DB Admin 07-20-2007 05:03 AM

I reused mine

steved 07-20-2007 07:11 AM

If installed post-turbo, what's a "safe" max EGT...keep in mind, the truck is more/less stock short being almost straight-piped and swiss-cheesed airbox...

I knew the made pre and post...even the Granatelli monitor I'm installing can read two pyro probes...but the threads I have read indicated they weren't nearly as accurate...

steved


All times are GMT -5. The time now is 06:48 PM.


© 2024 MH Sub I, LLC dba Internet Brands