5.9 Liter CR Dodge Cummins 03-07 Discussion of 5.9 Liter Dodge Cummins Diesels with Common Rail Injection

Edge cutting out????

Thread Tools
 
Search this Thread
 
  #11  
Old 02-14-2009, 10:07 AM
JTProuhet's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2008
Location: O'Fallon, MO
Posts: 360
Received 7 Likes on 6 Posts
Default

I see, so it is kind of one of them times when you just replace it for S&Gs and see what happens? What do they cost? How hard is it to replace?
 
  #12  
Old 02-14-2009, 10:10 AM
diesel pap's Avatar
Site Sponsor - Mighty Diesel
Join Date: Dec 2008
Location: West Virginia
Posts: 4,184
Received 213 Likes on 200 Posts
Default

sounds like it is defuelin for some reason. check your settings on juice. mine was doing that till i set them up
 
  #13  
Old 02-14-2009, 11:06 AM
JTProuhet's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2008
Location: O'Fallon, MO
Posts: 360
Received 7 Likes on 6 Posts
Default

I thought about that too, but if that was the case, it shouldnt be doing it under light throttle, and not under a little heavier throttle. I dont have the defuel on for the trans slip, and then the only other thing it could be is the EGTs and they are set for 1400* even though i hardly ever saw 1100* much less 1000* on the edge. I had the boost backdown set at 39 and then i set it to 60 just to make sure it wasnt that, and it still does it...

---AutoMerged DoublePost---

i am going to try and find this wire that everyone is talking about rubbing and chaffing on the ac hose and making it kind of run like mine is.... anyone have a pic of what they are talking about?

---AutoMerged DoublePost---

i think i found it.. right near/under the oil filter? I just found the wire if that is it, i will pull it in the shop and look for bare wires
 

Last edited by JTProuhet; 02-14-2009 at 11:06 AM. Reason: Automerged Doublepost
  #14  
Old 02-14-2009, 11:46 AM
Red_Rattler's Avatar
High Tech Redneck

Join Date: Nov 2007
Location: Columbus WI
Posts: 6,730
Received 496 Likes on 397 Posts
Default

yes, and that might be a cause. Here's a pic.

 
The following users liked this post:
JTProuhet (02-14-2009)
  #15  
Old 02-14-2009, 01:16 PM
JTProuhet's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2008
Location: O'Fallon, MO
Posts: 360
Received 7 Likes on 6 Posts
Default

Is the white think the oil filter i assume?
 
  #16  
Old 02-14-2009, 01:35 PM
Red_Rattler's Avatar
High Tech Redneck

Join Date: Nov 2007
Location: Columbus WI
Posts: 6,730
Received 496 Likes on 397 Posts
Default

Thats the bottom of the oil filter....
 
The following users liked this post:
JTProuhet (02-14-2009)
  #17  
Old 02-14-2009, 06:51 PM
JTProuhet's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2008
Location: O'Fallon, MO
Posts: 360
Received 7 Likes on 6 Posts
Default

alright, i will get under there this evening and look. Hopefully it is just that... If not, still debating on selling the edge and getting a PPE, or call edge and see if it just out dated....

---AutoMerged DoublePost---

Actually, i think it might have been that wire, I found the wire and just moved it away from the ac line, and the little bit it took me to drive home, it never did it. i am going to do a little more driving tonight so we will see.. hopefully that is all it was
 

Last edited by JTProuhet; 02-14-2009 at 06:51 PM. Reason: Automerged Doublepost
  #18  
Old 02-14-2009, 09:58 PM
dalton06's Avatar
Diesel Enthusiast
Join Date: Oct 2007
Location: Canton, GA
Posts: 489
Received 5 Likes on 5 Posts
Default

Is it the wastegate harness that is the issue or that pinkish wire that gets an exposed spot? My Bullydog acts up sometimes and i've been searching for ideas also.
 
  #19  
Old 02-14-2009, 11:47 PM
JTProuhet's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Dec 2008
Location: O'Fallon, MO
Posts: 360
Received 7 Likes on 6 Posts
Default

alright, im almost positive that it was just that wire.. after i moved the wire, it hasnt done it again... I am going to call edge anyways and see if there is a new update on it anyways. Even though i sold it yesterday, i will let the new owner know so. I really appreciate everyones help! Thanks alot guys!
 

Last edited by JTProuhet; 02-16-2009 at 11:41 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
justinsbeck
24 Valve 2nd Gen Dodge Cummins 98.5-02
6
01-18-2016 12:15 AM
Kfohne21
For Sale
0
12-23-2014 04:17 PM
somarillw
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
12-08-2014 09:07 PM
CumminsCrazed
5.9L 24V Performance
5
10-27-2014 09:02 PM



Quick Reply: Edge cutting out????



All times are GMT -5. The time now is 02:00 AM.