methanol injection install.
 

looking to install a methanol/water injection kit - to my 2003 truck.
already have predator and puck, s&b cold air intake, CFM intake elbow, 5" turbo back exhaust.

just looking to see where to attach/"t" into boost line?
where would a boost line be - or do i need to drill and tap into intake elbow and run from there?

don't do lots of towing - just wanna have a little insurance and/or better mpg/ egt's when i do.

kit i have coming is just a universal kit from "AEM"

THANX
CODY

Depending on which kit you got you will have to drill and tap your intake horn.. My kit came with three nozzles.. So I got a new intake horn with five ports two for boost and 3 for injection...

There's no drilling and tapping the CFM+. If he doesn't have the ports, he'll have to find either a differnt horn or some other way to inject.

As for the boost line, how are you getting your boost reading for your boost gauge???

Cody, if youfill out your signature with you truck info and mods then you will get more acurate feedback. To your question, I think most do the intake elbow, does your CFM have the pre-drilled ports? if not then maybe you can find a spot just before the elbow.....