Common Rail Help.....
buy here at the shop is looking at a 2004 325 horse truck automatic 4x4 crewcab long bed........what can ya do to it for 3K.......i got a total of 5K budget but he wants a lift wheels and tires also.......
tires are going to run about 275 a piece, lift kit was 700 because he wants a 5 inch but i think that is too much lift for 35's, i think he could get away with a 3 inch leveling kit but it depends on the truck cause i could barely get 33's on a buddy of mines 3rd gen with a leveling kit, rims are going to be 600 cause he only wants black 17's........i havent priced anything for a common rail in a while cause my buddy sold his so i stopped looking at stuff for them.......
since it sounds like he has about 2500 bucks left. i would do:
smarty- 650 new 500 used out of the classifieds normally
torque converter(triple disc)- 1000-1200
valve body- 500
edge ez or mp8 (pressure box)- 385-540 new edge ez can be found in classifieds for 250-300
that will still put the truck around 500hp
smarty- 650 new 500 used out of the classifieds normally
torque converter(triple disc)- 1000-1200
valve body- 500
edge ez or mp8 (pressure box)- 385-540 new edge ez can be found in classifieds for 250-300
that will still put the truck around 500hp
tires are going to run about 275 a piece, lift kit was 700 because he wants a 5 inch but i think that is too much lift for 35's, i think he could get away with a 3 inch leveling kit but it depends on the truck cause i could barely get 33's on a buddy of mines 3rd gen with a leveling kit, rims are going to be 600 cause he only wants black 17's........i havent priced anything for a common rail in a while cause my buddy sold his so i stopped looking at stuff for them.......
i have 315/70R17's(34.5") right now on h2 wheels with no rub sitting stock! my 35x12.5 would rub with the stock rims at full tilt with a 2 1/2" inch pro-comp leveling kit and 2" blocks in the rear. its the tire width and rim back spacing that makes the difference.
all trucks are different.....we put 305/70/17 MTR's on it with 17x9 eagle alloys and a 3 inch cup......we still had to trim.......that was on my buddies 2003 low output common rail regular cab long bed.........
one box/reprogrammer is enough for this truck, he will be pulling a boat, 4 wheeler, or single car trailer when he is towing.....he dont needs a monster, just some good stuff to make it tow and run a little better.......
those tire prices are for Toyo Open Country MT's in 35x12.50x17......i know a place that sells them cheap.......and they are load range E......
one box/reprogrammer is enough for this truck, he will be pulling a boat, 4 wheeler, or single car trailer when he is towing.....he dont needs a monster, just some good stuff to make it tow and run a little better.......
those tire prices are for Toyo Open Country MT's in 35x12.50x17......i know a place that sells them cheap.......and they are load range E......
Thread
Thread Starter
Forum
Replies
Last Post
Notso
Ford Powerstroke 08-10 6.4L
6
Dec 28, 2016 06:20 AM
Diesel Bombers
Latest Automotive Industry News
1
Apr 11, 2015 02:47 PM
Diesel Bombers
Latest Automotive Industry News
0
Feb 10, 2015 03:10 AM
1988 international
Ford 83-94 6.9 and 7.3L General
1
Oct 24, 2014 11:36 PM




