Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9 Liter CR Dodge Cummins 03-07 (https://www.dieselbombers.com/5-9-liter-cr-dodge-cummins-03-07/)
-   -   Common Rail Help..... (https://www.dieselbombers.com/5-9-liter-cr-dodge-cummins-03-07/15637-common-rail-help.html)

LOGANSTANFORTH 08-24-2008 10:41 AM

Common Rail Help.....
 
buy here at the shop is looking at a 2004 325 horse truck automatic 4x4 crewcab long bed........what can ya do to it for 3K.......i got a total of 5K budget but he wants a lift wheels and tires also.......

2500HeavyDuty 08-24-2008 11:26 AM

maybe tc and vb and upgrade with a big tuner

Redpatcher0481 08-24-2008 11:29 AM

Airdog:U:

SOUTHERN GA SMOKE 08-24-2008 03:26 PM

airdog 150 and a set of 50-9- horse injectors, and that should have you pretty close to 3K..
what is he wanting to do to the truck?

skynyrd 08-24-2008 03:43 PM

leveling kit - 100
35" tires -800-900
smarty- 600
tc- 1000
vb- 500
rims-1000
62mm turbo 1500
diy cp3 mod-free
that's $5,500 total
and about 500-550 to the wheels

LOGANSTANFORTH 08-24-2008 08:58 PM


Originally Posted by skynyrd (Post 198947)
leveling kit - 100
35" tires -800-900
smarty- 600
tc- 1000
vb- 500
rims-1000
62mm turbo 1500
diy cp3 mod-free
that's $5,500 total
and about 500-550 to the wheels

tires are going to run about 275 a piece, lift kit was 700 because he wants a 5 inch but i think that is too much lift for 35's, i think he could get away with a 3 inch leveling kit but it depends on the truck cause i could barely get 33's on a buddy of mines 3rd gen with a leveling kit, rims are going to be 600 cause he only wants black 17's........i havent priced anything for a common rail in a while cause my buddy sold his so i stopped looking at stuff for them.......

skynyrd 08-24-2008 09:31 PM

since it sounds like he has about 2500 bucks left. i would do:
smarty- 650 new 500 used out of the classifieds normally
torque converter(triple disc)- 1000-1200
valve body- 500
edge ez or mp8 (pressure box)- 385-540 new edge ez can be found in classifieds for 250-300
that will still put the truck around 500hp

MRaynor 08-24-2008 09:43 PM


Originally Posted by LOGANSTANFORTH (Post 199081)
tires are going to run about 275 a piece, lift kit was 700 because he wants a 5 inch but i think that is too much lift for 35's, i think he could get away with a 3 inch leveling kit but it depends on the truck cause i could barely get 33's on a buddy of mines 3rd gen with a leveling kit, rims are going to be 600 cause he only wants black 17's........i havent priced anything for a common rail in a while cause my buddy sold his so i stopped looking at stuff for them.......

How do you figure that? I have right at 33s under mine now and it is sitting stock as can be. I have no problems at all with rubbing at full lock. Your tire price is very cheap too.

skynyrd 08-24-2008 09:51 PM

i have 315/70R17's(34.5") right now on h2 wheels with no rub sitting stock! my 35x12.5 would rub with the stock rims at full tilt with a 2 1/2" inch pro-comp leveling kit and 2" blocks in the rear. its the tire width and rim back spacing that makes the difference.

LOGANSTANFORTH 08-25-2008 03:49 AM

all trucks are different.....we put 305/70/17 MTR's on it with 17x9 eagle alloys and a 3 inch cup......we still had to trim.......that was on my buddies 2003 low output common rail regular cab long bed.........


one box/reprogrammer is enough for this truck, he will be pulling a boat, 4 wheeler, or single car trailer when he is towing.....he dont needs a monster, just some good stuff to make it tow and run a little better.......


those tire prices are for Toyo Open Country MT's in 35x12.50x17......i know a place that sells them cheap.......and they are load range E......


All times are GMT -5. The time now is 01:09 AM.


© 2024 MH Sub I, LLC dba Internet Brands