Need injectors
Hi I have a 2003 Dodge Ram Cummins
I need to buy some injectors I was looking at the Sinister brand reman injectors # SD-712-501. I heard that brand new injectors are better but they're too expensive to buy I'm kind of on a budget. Has anybody ran the Sinister injectors? Do you guys have any other recommendations on what injectors to buy? |
You may save coin on remans now, but it could cost you a melted piston later down the road. Check out injectors direct for new injectors. I believe they are just under $2000
|
Ok I will check them out. Thank you
|
Reman injectors are essentially a used injector- give jkidd a shout at Diesel Auto Power and let him know you're on the forum. He had the best rates around when I bought mine
|
So question based on injectors...Do most people replace their own? Is it hard? I've never done it but when the time comes am I taking her in or is it something I could do myself?
|
you can replace them your self, but you want to be VERY, VERY clean about it. then make sure they are installed correctly and torqued to spec.
|
Originally Posted by MaverickFlyBoy
(Post 1125336)
So question based on injectors...Do most people replace their own? Is it hard? I've never done it but when the time comes am I taking her in or is it something I could do myself?
|
Originally Posted by CumminsCoalRoller24/7
(Post 1125310)
Reman injectors are essentially a used injector- give jkidd a shout at Diesel Auto Power and let him know you're on the forum. He had the best rates around when I bought mine
I sent jKidd a message about pricing on his injectors and I am waiting on his reply. Talk to the guys at Sinister Diesel about their sinister reman injectors. They say that they use some of GB Parts to remanufactured there injectors and they are assembled and flow tested in house before they are ship out. I can't find no reviews on Sinister injectors? |
do not get remanned injectors. remans have a much higher failure rate then new injectors. even bosch with there millions of dollars worth of machines, clean rooms and sticky floors still have more failed remans then new their new injectors. also make sure you get the correct injectors with the 143* spray pattern. i know you said money is tight, but it is a good ideal to put new feed tubes in. https://www.injectorsdirect.com/prod...uel-injectors/
|
All times are GMT -5. The time now is 06:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands