Boost not reading right??
Hey guys new to the site. Have ?? About boost psi? I have a 06 ctd with a CAI and bully dog power pup. My boOst readings is coming from a edge insight monitor. It reads 23.67 at WOT. Sometimes 23.96 max. And that's it. Is this correct? I thought I should see at least 32psi. Any help please!
|
Do you have a boost fooler? Get a real gauge Mechanical to read off the intake!
|
No boost fooler. If I get a edge w/attitude do u think it would show the correct psi?
|
probably not reads the same signal the other one reads! a real gauge will tell the truth! and if it is that low there's a problem with the turbo! Did you check for boost leaks? Any black smoke on hard take off?
|
Got it! I do have heavy some out the back. I have the tuner set to extreme. I'm gunna have to get a few. Gauges here soon. I don't think I have any leaks
|
Pull off the turbo air inlet hose and check the turbo. Then build a plug for the hole with a air connect use a regulator to pressurize system to 20 psi and you should hear a leak if not soap everything up look for bubbles! All parts available at Home Depot! I use an expandable plumbers plug!
|
Thanks for the info. I'll let u know if I find anything!
Dangerous1965 |
All times are GMT -5. The time now is 01:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands