blew my engine...what to do?
I just bought my 2006 dodge mega cab a little over two months ago, just the other day drove it ten miles to unload somethings for my wife. then i started it back up drove it about 1/2 mile while i was accelerating blew the number 2 piston, bent a rod, 4 valves are stuck, and injector is bad :argh: . Took it to the diesel shop in town which happened to be just across the highway from where my truck blew its engine. They told me to just put in a new engine. I found a place that will put in a reman. with everything new on it along with new head studs and rods for $14,500 installed. Is this a good price? Don't know much about a reman. engine either. Any input is appreciated. Thanks
|
There's a nice 06 engine on ebay for 6k snatch it up and put it in! If you were closer I would put it in! 14,500 is a joke! you can buy an 06 for that THE WHOLE TRUCK!
---AutoMerged DoublePost--- And it has no warranty just two months ago?! |
I didnt get the extended warranty... i know dumb on my part. been screwed over in the past by them. should have got it.
|
Most dealers have at least a three month 3000 mile warranty? A tail light warranty is real shady!
---AutoMerged DoublePost--- Get a lawyer Lemon law there? |
It's a 6year old truck. By no means would that be covered by lemon law.
To the op, I would look for a used engine. But for a complete crate cr Motor with install, that sounds about right. Because you wont have a core motor, so thats where the extra money comes from. |
id say to look around for awhile i can get new replacment engines for a CR for like 3600$ but i dont know what all that includes. pm me if u want this places number.
|
Originally Posted by BAM5.9
(Post 928747)
I just bought my 2006 dodge mega cab a little over two months ago, just the other day drove it ten miles to unload somethings for my wife. then i started it back up drove it about 1/2 mile while i was accelerating blew the number 2 piston, bent a rod, 4 valves are stuck, and injector is bad :argh: . Took it to the diesel shop in town which happened to be just across the highway from where my truck blew its engine. They told me to just put in a new engine. I found a place that will put in a reman. with everything new on it along with new head studs and rods for $14,500 installed. Is this a good price? Don't know much about a reman. engine either. Any input is appreciated. Thanks
|
Injector went bad. The shop said there wasnt any reason to tear down any further. The reman. engine i found that was 14,500 is the final price with everything new and a edge insight monitor, mbrp turboback exhaust, arp head studs, 12 valve rods. and i will have a warranty.
|
You going to part out the old engine?
|
Originally Posted by GreenGoblin
(Post 928949)
It's a 6year old truck. By no means would that be covered by lemon law.
To the op, I would look for a used engine. But for a complete crate cr Motor with install, that sounds about right. Because you wont have a core motor, so thats where the extra money comes from. |
Backwater has a motor in the under 6k and labor is maybe 15 hours?
Sent from my DROID BIONIC using Tapatalk 2 |
put a duramax in it:tttt: or a Detroit 2 stroke 4-71. ARAMP1's Ultimate TowRig Build Thread:choochoo:
|
Full rebuilts can be had cheaper....hell I think industrial injection sells performance motors with warranty for that price.
|
Rebuilding would prob be cheaper, but just buying a new/used engine would be easier and you could prob just do it in your driveway or garage! Either way... That really sucks man :ouch:
|
Originally Posted by CHEMMINS
(Post 934210)
Full rebuilts can be had cheaper....hell I think industrial injection sells performance motors with warranty for that price.
Luke |
i got me a loooonnngbed
i got me a loooonnngbed
|
You can always buy one off ebay or craigslist!
|
Did it break the block or can your bore it our or put a sleeve in the bad hole? You can buy a IIS Stock Engine with stock head, studs, coated pistions, and balanced rotating assembly for $9600 + 2500 + shipping. But thats no turbo, cp3, or injectors.
|
All times are GMT -5. The time now is 07:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands