01 dodge 12v swap havin problems
#1
01 dodge 12v swap havin problems
Hi everyone, i have a 2001 cummins that i swapped a 12 into. my problem is that the tranny wont shift at all on its own. i need to hook up the cam sensor and thatll fix it. ive heard that people have swapped out cam gears to get the tone ring for the sensor. i was wondering if anyone has done this swap before and what they have done to make their truck work. any suggestions will relly be appreciated, thanks.
#3
#4
#5
if the apps is the tps then yes i am using the 24v setup. i used the 24v linkage and it works really good. can u tell me where i can get the relocation kit cause i have never seen one. and i was thinkin the same thing bout gettin the cam, i mise well since ill have it apart, not sure witch one to get though. i was thinkin the hamilton cam, but not totally sure.
#6
#7
#8
first put those back on the pump. without them you have no way to tune the pump. if your still on the stock injectors i would just bump the timing to 16* and slide the plate back just a little bit to keep it cool or turn your turbo into a hx35/40 hybrid. if you have 100hp injectors then you could run a S362/65/14
Thread
Thread Starter
Forum
Replies
Last Post
torino73
12 Valve 2nd Gen Dodge Cummins 94-98
0
04-14-2015 11:15 PM
Josh Chretien
5.9L 12V Performance
5
03-01-2015 06:00 AM