New Owner!
Hey everyone,
I just purchased a 2002 Ram 2500 with a 5 Speed! I've been on here alot and while I cannot do any performance mods, (yet) the truck is completely stock and only has 80,000 miles! I'll be increasing the performance a little later on, but I'd like to get any basic maintenance covered first! I just purchased the following: FLEETGUARD LF3894 oil filter FLEETGUARD AF25541 air filter FLEETGUARD FS19855 fuel filter I plan on using Rotella synthetic to do an oil change this weekend along with all the basic maintenance. Is there anything else I should check/look at? I've been reading about the VP44 problems, and while the truck only has 80k on it, I want to be safe, so I'm wondering what the best course of action should be. Thanks in advance! |
firt mod id do is an airdog or fass. then gauges. small programmer, then clutch and injectors.
|
Originally Posted by biged681985
(Post 911623)
firt mod id do is an airdog or fass. then gauges. small programmer, then clutch and injectors.
|
The torque from a chip can make a stock clutch slip. Although a stock clutch can last a while if treated properly, it's good insurance to stay on the road and out of the shop unplanned.
I agree with a lift pump upgrade, even if you don't have plans of turning up the power. $500 now will save $1000+ down the road. |
The more ive read on the lift pumps, the more I want to get something better than the FASS DDRP pump. What would te next best pump be? And should consider a relocation kit? I agree spending money now is much better than a new vp44 however I need to be as cost effective as I can. When I do start upgrading I don't expect to be going crazy, I'll probably so an intake, exhaust, edge and an elbow to start.
|
Next best would be a FASS Platinum95, IMO. It has one filter, so I suggest running it to your stock fuel bowl. It will supply all the flow you will need, and give a little extra filtration.
|
So when you say fuel bowl, you mean the stock filter assembly? And I guess no relocation with that pump?
|
That pump is mounted on the Frame Rail and yes it deletes the stock filter.
Luke |
I am going To save up for the better pump then. How long could I run the stock? I'm guessing I won't for more than a month but I have to recover from buying the truck before I can put too much $$$ into it.
|
Unfortunately there is no guarantee with a VP44. Best thing to do is get a fuel pressure gauge ASAP. You don't want to see less then 10psi at the pump.
|
All times are GMT -5. The time now is 12:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands