I have just a quick question I'm buying
A new lift pump today but I can not figure out if it's a out of the tank or in the tank and suggestions ? Would help thanks

 

dont buy a factory one get a fass system.The factory pumps fail and fail often.

 

What year is it?


Sent from the mans IPhone.

 

98.5

 

Easiest way to tell is look below the fuel filter, You will either see a pump with wires coming off of it or a silver block with no wires. Another sign is a sticker on the front clip stating a change from factory

 

Yep, works very well. Other thing to do is bump the starter, and leave the key in the run position. Listen to see where the noise comes from. Either on the block, or in the tank.

 

what pump are you going to buy?

 

I was thinking the raptor 100 I don't want to have to drop the tank anyone else have any other suggestions ? And I found out its an out of the tank pump

 

So you should be fine with the raptor... fill out your sig so we know what you have. You need fuel pressure gauge- but you should be able to do the raptor without dropping the tank but you may run into the 1/4 tank issue.

 

ok i think i filled it out ? and what is the 1/4 tank issue any way to get around it ? and i have the edge juice attiude cts with the fp gauge