Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   O2 Sensor... (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/9505-o2-sensor.html)

LOGANSTANFORTH 02-11-2008 01:09 PM

O2 Sensor...
 
what years of 24 valves got one, if any.....my buddy has a 99 and wants to put a A/F ratio meter in it......

DB Admin 02-11-2008 01:15 PM

I dont think any have 02 Sensors

Benjamin 02-11-2008 01:23 PM

there is a company out there that make an air fuel gauge for diesels.... i can't find the link as i can't remember the board it origionally was posted on..... it ain't cheap though.... what you could do if you wanted to experement with it is get a sparkplug non-fouler (to use as the bung) and a one wire O2 sensor off an early model Thunderbird it'll be a Bosch part number 11027 at autozone and should be less than 20 bux. plumb that in the exhaust close to the exhaust housing and use a cheap A/F gauge from the parts store and see if it'll work. the only down side i see is it'll get sooted up real fast if he's "over fueled"

LOGANSTANFORTH 02-11-2008 01:31 PM

well to work with the Autometer Sport-Comp gauge it has to to be a narrow band O2 sensor.....meaning 0-1 volt.....whoever they bought it from (supposedly Jegs) said it would work on a diesel, me knowing better, i highly questioned that, but they said Jegs said it would, so i called Autometer and they reaffirmed my suspicions, it wouldnt work....NOW...i dont know who got lied to me or them.....im beginning to think i am, cause knowing these two guys, they never tell the whole story...........

Benjamin 02-11-2008 01:34 PM

well that o2 sensor is a narrow band one.... i built a gauge and used one of those sensors on a friend of mine's car.... i'd say get yer friend to get the sensor above, get the bung, weld that baby in and try it out......

LOGANSTANFORTH 02-11-2008 01:43 PM

i might just tell them it wont work......just cause i dont want to have to walk them through it step by step on the phone......



a big thanks though Ben....

Benjamin 02-11-2008 01:46 PM

10-4 anytime...


All times are GMT -5. The time now is 02:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands