Tell me this is right?
So i was talking with my dad about draw straws today for my 24 valve and he said he had heard about replacing the whole entire canister with one from a jeep liberty?? Anybody heard of this? Apperantly they are good to around 500 horse and already have a 3/8 in straw in them.
|
why not just use the vulcan draw straw V? its half inch
|
Originally Posted by colinheitshusen
(Post 880570)
So i was talking with my dad about draw straws today for my 24 valve and he said he had heard about replacing the whole entire canister with one from a jeep liberty?? Anybody heard of this? Apperantly they are good to around 500 horse and already have a 3/8 in straw in them.
|
Originally Posted by 01quadcab
(Post 880642)
that is used in the common rail trucks because they didn't use an in tank fuel pump
|
The DSV is awesome, IMO. I have had it in my truck for a couple years now, and have had zero problems. I can run the tank damn dear dry, and still have lots of fuel available. If I ever had a fuel sender issues, I'll buy the Liberty unit that's modified. It works on 98.5 to 08, so a DSV isn't your only option. I think the DSV is your best option though.
Modified liberty fuel module |
Alright so as long as it works im going to use the Liberty Mod because I cracked my original canister and dont have plans on going to 500 horse.
|
It's a good unit. Even if you do plan on going to 500 or more, it will supply the fuel just fine.
|
Even if you go more you can replace it with a 1/2 inch straw and be fine
|
All times are GMT -5. The time now is 01:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands