24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

hard starting

Old Feb 14, 2012 | 06:25 PM
  #1  
Sawman's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 106
Likes: 1
From: Clinton TN
Default hard starting

I have the truck in my signature, if truck sets over night or a long time threw the day, it will crank but wont start. i have noticed that when I turn key on and wait to start light has a delay, it never use to do this. also when truck fails to start it seems like raptor is running for longer than it should. Once truck starts you can turn off and it will start back like it should. I pulled cross over tubes and replaced o rings last week end thinking it was sucking air, but no luck. I have thought it might be intake heater but it seems to be working as it should. Help please, thanks
 
Reply
Old Feb 14, 2012 | 08:10 PM
  #2  
Whit's Avatar
Site Mascot
Joined: Mar 2007
Posts: 16,010
Likes: 940
From: Why-homing
Default

its a fuel issue..................getting air somewhere
 
Reply
Old Feb 16, 2012 | 08:23 AM
  #3  
globalwarmingcontributor's Avatar
Diesel Enthusiast
Joined: Nov 2011
Posts: 194
Likes: 12
From: Illinois
Default

check the fuel lines coming off the tank to the raptor, and then raptor to the injector pump, or wherever it goes after raptor 100.. also check the injector lines from IP to blcock. could be a loose fuel line.. maybe?! just making a few suggestions.

---AutoMerged DoublePost---

also ... with truck running start cracking injector lines,.. make sure you are getting fuel to each injector. and not just blowing air.
 

Last edited by globalwarmingcontributor; Feb 16, 2012 at 08:23 AM. Reason: Automerged Doublepost
Reply
Old Feb 16, 2012 | 07:59 PM
  #4  
Sawman's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Dec 2009
Posts: 106
Likes: 1
From: Clinton TN
Default

thanks for the input, we have went over it time and time again. It seems like something electrical, am not getting any power to grid heater, and dash lights are working odd. The wait to start light will come on 20 sec after key is on, all other lights just work randomly. wish i could find what sends power to grid heater seleniods but got tired of messing with it tonight
 
Reply
Old Feb 16, 2012 | 08:35 PM
  #5  
hydroshok's Avatar
Diesel Enthusiast
iTrader: (1)
Joined: Dec 2007
Posts: 268
Likes: 21
From: Nashville, TN
Default

Did you check the return valve from the VP 44? You may have two unrelated issues, but the power to the solenoids comes off the driver's battery. They are located on the fender below the battery. Your connections may be corroded.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Excursion73
Ford Powerstroke 99-03 7.3L
2
Oct 27, 2015 05:21 PM
Easton18t
Chevy/GMC 6.2L and 6.5L
2
Jul 30, 2015 02:06 PM
joker55
Ford Powerstroke 03-07 6.0L
2
May 15, 2015 10:24 AM
gwmeyer
12 Valve 2nd Gen Dodge Cummins 94-98
1
May 14, 2015 12:46 PM
91 7three
Ford 83-94 6.9 and 7.3L General
1
Jan 7, 2015 09:37 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:53 PM.