Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   screaming down the road and died wont start? (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/91353-screaming-down-road-died-wont-start.html)

derbyboy25 02-14-2012 03:22 PM

screaming down the road and died wont start?
 
ok guys a have 01 5.9 cummins with an edge juice with attitude programmer i pulled away forom the stop light and was pouring some smoke to the ricers shifted into 4 th gear and puh it died. check engine light came on and it wont refire. my fass fuel is working and i ahve pressure at the injection pump and on number 2 and 5 injector. havent checked the other injectors yet. plugged the hand held in and it shows some codes when i lloked them up it says injection pump malfunction. so we cleared the codes and it still wont start. truck is stock other than chip, fass fuel, and air intake. any ideas? checked fuses in dash and under the hood in the box. Any ideas or thought are greatly appreciated.

empty wallet 02-14-2012 03:51 PM

it said injection pump malfunction you thought you could clear codes and go? :D

Any other codes? post which code it was, chances are you're going to be in the market for a new vp44

turbo20psi 02-14-2012 03:53 PM

Injection pump malfunction means most of the time the electronics on the VP44(injection pump) is fried. You can first check all the fuses in the truck. Then check for power to the injection pump.

What is the fuel pressure at the VP44? What FASS pump do you have?

turbo2332 02-14-2012 03:56 PM

what kind of pressure were you running at WOT and for how long? and how much fuel do you have at the injectors? does it shoot across the shop?

derbyboy25 02-14-2012 05:57 PM

i will have to look up the codes again. i didnt write them down i jsut copied them on to my droid and lloked them u; on the internet. i have a FASS 150 GPM i alway have about 14 or 15 PSI of fuel pressure when wide open. it is set to scream at me at 12 PSI and it never did so i doubt it was starving for fuel. i will check pressures when i get home to see what it is running.

---AutoMerged DoublePost---

the codes were 0251,0253, and 1688 on got off of it.

---AutoMerged DoublePost---

the codes were 0251,0253, and 1688 that came up on the handheld

colinheitshusen 02-16-2012 10:34 AM

The first two are injection pump control codes. not sure about the third. Sounds like the pumps bad to me.

03Powerstroke 02-16-2012 10:40 AM

i bet the ricers were laughing their ass off:humm:

dukeboy_318 02-18-2012 02:40 AM

1688 = New Injection pump. My guess is that your fried the electronics on the VP44.

And yeah, don't get me started on smoking people out.................

RollinCoal99 02-18-2012 01:40 PM

haha the ricers are prolly laughing after you pulled off the light and white smoke came out... but yeah definatly need new vp44. hope you got 1k :pca1:


All times are GMT -5. The time now is 04:09 PM.


© 2024 MH Sub I, LLC dba Internet Brands