24 Valve 2nd Gen Dodge Cummins 98.5-02 Discussion of 24 Valve 5.9 Liter Dodge Cummins Diesels with VP44 Injection Pumps
Sponsored by Trailer Plus

New starter and will not start... Need help

Old Feb 4, 2012 | 11:13 PM
  #1  
Atrainscummins's Avatar
Thread Starter
|
Newbie
Joined: Jun 2011
Posts: 9
Likes: 0
Default New starter and will not start... Need help

My starter went out yesterday and I ran up and got a new one. I rapidly replaced the bad starter. I did not disconect my batteries before replacing and of course I mildly arked out my power wire once. Now she wont start, so I checked fuses and they are good and while swaping some relays with the blower motor I realized that isnt working either. Where do I start?

---AutoMerged DoublePost---

The relays are clicking . I have power to lights and gauges. Just not to falOn motor or starter.

---AutoMerged DoublePost---

The relays are clicking . I have power to lights and gauges. Just not to fan motor or starter.could it be one of the relays on the driver side fender well?

---AutoMerged DoublePost---

Ok, I am able to turn the key on and jump the starter with a screwdriver and she firers right up, however the air bag and abs lights were on and still no heater motor.... Any ideas?
 

Last edited by Atrainscummins; Feb 4, 2012 at 11:13 PM. Reason: Automerged Doublepost
Reply
Old Feb 4, 2012 | 11:26 PM
  #2  
RAW's Avatar
RAW
Administrator

iTrader: (1)
Joined: Aug 2009
Posts: 6,218
Likes: 684
From: Alberta
Default

Did you check the fuses in the cab as well?
 
Reply
Old Feb 5, 2012 | 12:21 AM
  #3  
Atrainscummins's Avatar
Thread Starter
|
Newbie
Joined: Jun 2011
Posts: 9
Likes: 0
Default

Yes I sure did. its super weird. Im lost
 
Reply
Old Feb 6, 2012 | 12:29 AM
  #4  
aguilar_15's Avatar
Diesel Enthusiast
Joined: Sep 2009
Posts: 343
Likes: 25
From: Stephenville, Texas
Default

How about the relays under the hood, where those all good? I had this happen too, turned out to be the relay was blown. Expense lil bugger too, nout $12 at my parts store. Good luck
 
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:03 PM.