clutch squeel?
 

This just started today. When I push the clutch in Ill get a squeel, and when i let it out i get the same squeel. The clutch doesnt slip or make any noise while its engaged. Everything seems fine except for the noise.

Sounds like the throwout bearing is going out.

agh, i was afraid of that....any other symptoms i should look for?

---AutoMerged DoublePost---

also how soon should i be looking into getting this fixed

My Single Disc clutch did this..... would it happen to be a Ceramic Clutch?

Mine did it for about a week last winter before the bearing just fell apart inside there. I still had half my clutch left but you might as well upgrade the clutch while you have it opened up.

its my stock clutch as far as i know Luke. and I guess ill have to try to find some funds for the upgrade haha, of course this would happen just as im looking at an 07

throw out bearing its a cheap part. about a 2 hour job depending on your skill level. youll need to seperate tranny from motor of coarse but dont need to drop it... just move it back and swap it out while the trans is sittng on jack. i would even leave to tc bolted to trans

Thanks bud, but the tranny has to come out because i was attempting to go on vacation when i blew a seal or gasket in the tranny i believe so its gotta go to the shop anyways haha but thanks for the input