Turbo Bad???
I have an 02 Cummins and it runs fine empty and fine on level ground pulling. But when I pull hills with a trailer or load it seems to lose power. I can barely hear the turbo (just a little whine) Compared to my 95 which you could really hear. I was told the turbo's are just alot more quite but I feel it isn't working the way it should. How can I check it to see. I don't have a boost gauge on it. Am I on the right track or should I be looking in a different direction?
|
Throw some gauges in that thing. Boost, Pyro and Fuel press. Then you will have a good idea what is going on. Ever replace the lift pump or 44? Check and see if you have any codes poping up.
|
Pop your intake tube off and check for play or any damage. Check for any leaks as well. Check your apps for proper adjustment reset your pedal.
|
I took the intake tube off and it spins freely and not much play at all. I am ordering gauges and will get them hooked up as soon as I get them. I need to go find a scanner to hook it up to. Code reads P ECU then P Done. I need to find out what that is.
|
check for boost leaks. your engine like to have all it can and not waste any!
|
All times are GMT -5. The time now is 06:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands