Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   popping in front end (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/76827-popping-front-end.html)

wyodiesel92 05-24-2011 09:27 AM

Well the other day I jacked up the front end and sat it on jack stands trying to be able to recreate it with the truck off and had no luck, couldn't find anything with play either

Natedawg! 05-25-2011 01:05 AM

i had the same thing happen to my 2002... front end was tight, replaced the track bar bushing and got better, ended up replacing the bolt and self tightening nut on the axle side because they were striped hasnt done it since... try checking/ replacing the bolt and nut.. and make sure u have the bolt torqued down

cmesmokn 05-26-2011 01:00 PM

My 2000 did that too, it was the track bar bolt and bushing on the axle side

wyodiesel92 05-27-2011 12:25 AM

Well tightened down the bolt on axle side side of track bar and the pop stopped? It wasn't even a 16th of a turn loose so idk but now its gone so guess that was it.

Natedawg! 05-27-2011 03:17 PM

If it pops again replace the bolt and nut on the axle side.. They say the bolt should be torqued to 130ft lb

turbo20psi 05-27-2011 07:52 PM

I had to order a new one (bolt and nut). Torqued it and checked it a week later had to retorque a quarter of a turn.


All times are GMT -5. The time now is 01:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands