Fan Clutch going out
 

My fan clutch is starting to go out. Someone at work said to use a flex fan i think thats what he called it. If so do yall have a part number and where do I order one or should I go back with the fan clucth. Thanks for yall's input.

Flex-a-lie perhaps?
262 Dodge Cummins Diesel

There are also these:
Derale Performance Dual Electric Fans

Do you do a lot of towing, or is the truck more of a commuter? The factory fan can pull more CFM then these electrics can, so goes the rumor.

Flex fans are junk. They need more power to turn than a clutch set up. Had a friend lose some fingers cause one of these came apart

Thanks I may just use the stock fan clutch.

Check out this thread. I have been running these dual fans on my truck for over a year and tow heavy in the heat of summer. I have yet had to use the high settings even hauling 20,000 plus pounds in 100 degree heat. Total cost was less then $100.

https://www.dieselbombers.com/5-9l-r...-write-up.html

the electric flex-a-lites are great fans. i had them on my truck for 2 years and dyno proved 23 hp at the wheels. and 2 mpg with them. cooled great in all weathers and the a/c worked much better. only reason i took them off was towing really heavy loads they dont work quite as well. im bout to put them back on now though, dont tow anymore. as far as the flex fan them drawing more than a clutch fan thats crap and a big load of it. they are lighter and less weight takes less power to spin. we put one on a 02 in the shop and removed the clutch and it cools perfect.

i love my flex a lite fans!!!!!

Hey Blue Monster would you happen to have a part number on that and where to get one.

the 94-02 is flx-262 03 up is flx-264

---AutoMerged DoublePost---

summit has them and anyone whos a flex a lite dealer can get them. we can get them here in the shop.

Thanks I will check it out.