Help installing a Fuel Pressure Guage
Hey guys, could use some input if you have the time. My 02 has a 1/2 inch braided line with an untapped 90 elbow coming off of the ip going to the reservoir. I have an edge J/A but am having a hard time understanding how to make the banjo bolt or an equivalent work with the edge. I had a short and now I think my ECM is acting weird and my lift pump is intermitent when turned on and the truck has a different idle now. Just want to make sure my fuel pressure is good so I can trouble shoot some of this other stuff going on. Any help would be great..., thanks guys :c:
|
untapped 90 elbow coming off of the ip going to the reservoir |
The elbow itself is not tapped just a smooth 90 coming from the filter housing to the IP. The smooth 90 elbow is the same on both ends for the IP and filter housing. I am out of town with work or I would put up some pictures maybe would help. Sorry still getting used to the terms. Hopefully I am not describing an apple when I am trying to talk about an orange. :rake:
|
I suggest one of these then:
BANJO BOLT - TAPPED ('98.5-'09, 5.9L & 6.7L)-Dodge Cummins Diesel Truck Accessories – Geno’s Garage Replaces your untapped banjo bolt with one that it tapped. |
All times are GMT -5. The time now is 02:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands