31 psi w/ stock un touched HY35???
So I got my edge hooked up and AD150 and Im popping my waste gate at 31 psi. My turbo is untouched and no mods. It seems a little high, not that im complaining but i didnt think an HY35 would get that. What do you guys think? Ive heard of people j hooking and plugging there HX35 and getting that but mine is untouched. Is this normal or am I lucky?
|
My 2001 HO with edge, intake and 4" exaust runs 32 under load. And it has 210k with no problems on turbo or motor.
|
I could only get 26 with the W/G on, and 31 PSI with it plugged.
|
put a mechanical boost gauge on it to know for sure what it's making. my edge read low when I added a mechanical boost gauge with my 62 and 110's the edge said 36 mechanical said 48
|
Without a J-hook I can only get 18psi. I would suspect your wastegate is stuck shut.
|
with a EJWA on my old stock hy35 i got 40 on a external gauge..... than it blew up :scare2:
|
my mechanical gauge shows my waste gate dumpin about 32 lbs with stock turbo... everything seems to be runnin fine
|
On my 02 I had the edge comp stacked with bully dog outlook and j-hook with the waste gate plugged and I was getting 43psi on the mechanical... I don't trust the chips reading it said 38psi
|
1 Attachment(s)
Well I am goona post a pick I got 38psi on my edge. I took a pic last night. I just think thats crazy with a un molested HY 35.
|
Maybe the EDGE is jacked up
|
All times are GMT -5. The time now is 02:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands