Dealer said no high idle.
So I took my truck to the dealership today to have the high idle turned on and to get my speedo recalibrated. I left with a sore *** and badd news.
Shop guy says my truck doesnt have the high idle option. He said it had the 3 cylinder idle but he didnt turn it on. My speedo now shows 3 mph faster instead of 5 slower.
Sorry needed to vent. Is it true that my truck has no high idle.
Thanks
Shop guy says my truck doesnt have the high idle option. He said it had the 3 cylinder idle but he didnt turn it on. My speedo now shows 3 mph faster instead of 5 slower.
Sorry needed to vent. Is it true that my truck has no high idle.Thanks
The High idle is part of the software that Cummins put into the ecm, dodge did not use it. If someone near you has a SMARTY, all you have to do is upload any program onto your truck them return it to stock, and you will have the 3 cylinder and the high idle modes.
Your dealer is a crackpot when it comes to diesels. But then again, most of em are. The high idle and three cylinder shuffle are all a part of the same update. Under a certain temp reading it locks out 3 cylinders and over that temp it only activates the high idle. Some place here on the site is a thread that tells exact temp ranges for each function and the flash number and info for the update.
I think, the dealer should be able to turn on the 3 cylinder/high idle. It only works when certain parameters are met. The high idle will rev the engine to 1200 rpm at a certain temp., while the 3 cylinder idle will turn on when it is colder.




nobody hit me