Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   weird start? (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/61817-weird-start.html)

98dodgecummins 10-29-2010 09:46 AM

weird start?
 
ok whenever i go to start my truck i have to turn the key and wait about three seconds for the truck to start,but if i just hop in my truck and not wait for about three seconds with the key turned on the truck wont start it will just crank crank crank.

biged681985 10-29-2010 10:18 AM

the three seconds is kinda mandatory. the problem ur having, is ur lift pump is over pressureizing the pump, cauing a hard start. if u let it the pump kick on, then back off, it will start right up.

98dodgecummins 10-29-2010 12:40 PM

is this normal it wouldn't seem normal.

24vcumminscowboy 10-29-2010 03:04 PM

ya its normal its also for ur glow plugs to heat up some mornings when its cold ill sit there for a minute b4 i can crank it up

biged681985 10-29-2010 03:19 PM

a cummins does not have GLOW PLUGS. they have a grid heater that heats the air before it enters the motor.

yes it is normal for them to have to be waited on to start. u should always let the grids finish cycleing before u try and start the truck. the reason y the fuel pump runs for 3 seconds and then stops is because the vp44 is finicky. it will create a hard start problem if it is over pressurized while its trying to start. then as soon as the motor is running,the lift pump kicks back on and will continue to run till the truck is turned off.

98dodgecummins 10-30-2010 12:43 PM

ok

Wirtzy 10-31-2010 05:14 PM

i had a problem with mine starting and it was the check valve on the return line. It was seeping air and i think causing pressure lose. got a new one and havent had a problem now. Other than the washers going bad but have new ones of those and it works great again.

Dirt_Diver 10-31-2010 05:50 PM


Originally Posted by biged681985 (Post 644269)
a cummins does not have GLOW PLUGS. they have a grid heater that heats the air before it enters the motor.

yes it is normal for them to have to be waited on to start. u should always let the grids finish cycleing before u try and start the truck. the reason y the fuel pump runs for 3 seconds and then stops is because the vp44 is finicky. it will create a hard start problem if it is over pressurized while its trying to start. then as soon as the motor is running,the lift pump kicks back on and will continue to run till the truck is turned off.

I think its funny how alot of people think a cummins has glowplugs or better yet how a cummins is the same thing as a powerchoke and durawax:w2:


All times are GMT -5. The time now is 12:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands