Diesel Bombers - Remote Keyless Entry (RKE) Programming Help

Diesel Bombers (https://www.dieselbombers.com/)

- 24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)

- - Remote Keyless Entry (RKE) Programming Help (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/59216-remote-keyless-entry-rke-programming-help.html)

Remote Keyless Entry (RKE) Programming Help

Hello,

Need to program a spare Key fab for 01 CTD, I tried the online methods with no success.
I can get the truck to reprogram mode but my spare will not program. I had the dealer test the key fab, battery and signal are strong per dealer. Just need a little help without taking my truck to the dealer.

thanks
HD

Quote:

Programming Additional Transmitters
Up to four transmitters can be programmed. When programming a new transmitter, all transmitters intended for use with this vehicle, except the transmitter used to start the programming mode, must be programmed within the 30-second programming mode. To program a transmitter, turn the ignition switch to the ON position with the vehicle stopped. Press and hold the unlock button on a currentlt programmed transmitter for a minimum of four seconds and a maximum of ten seconds. While pressing the unlock buttor, press and release the panic button. Release the unlock button and a single chime will sound. This indicates that the module is in programming mode. Within thirty seconds, press and release the lock or unlock button on all transmitters intended for use with this vehicle except the transmitter used to start the programming mode. Successful programming will be indicated by a single chime.

I was ale to find this, is this the procedure you are using?:humm:

Seems to be a few different methods;
http://dodgeram.info/tsb/2002/08-007-02.htm

I have a copy of the reprogramming instructions. If you send me a PM with your email in it I will scan it and give you a copy. But You need to have at least one working fab to do it with the instructions I have.

---AutoMerged DoublePost---

Quote:

Originally Posted by RAWilliams (Post 624912)

I was ale to find this, is this the procedure you are using?:humm:

Seems to be a few different methods;
TSB 08-007-02

This is very similar to the one that I have.

different reprogram methods from the original manual, here's some of the website: filear.com, TSB 08-007-02. I tried them all, i'm using a working keyfab to force the truck to program mode.

If you still want that instruction sheet give me a PM and as soon as I get back home I will send it to you.

---AutoMerged DoublePost---

Email sent.

Get gone spam boy! :bat:

---AutoMerged DoublePost---

Looks like he was fried like the spam he was. :choochoo:

There was no spam about it. I have a copy of all of the dodge 96-06 programming instructions for the key fab. Would you like a copy? Plus dude you know me!

haha, yeah......nothing to do with you bud. Where are you these days? I'm south till tomorrow then back home to Ut.