Hey everybody, noob here -

I have a 01 dodge 2500 diesel in need of a turbo charger waste gate actuator and the actual waste gate itself...

the dealership is being absolutely NO help!

would anybody be able to tell me if there is a difference for mounting between the automatic and standard transmission trucks?

anybody know where to find these parts?! so frustrating!!! any and ALL help is really appreciated.

 

There is a difference between the two, auto has a HY35, manual a HX35. I did post a thread on here a while back that shows the difference between the two. If you have a auto, I suggest upgrading to the HX35 to fix the issue. If not, I'm not too sure where to looks for parts.

 

i do have an auto and wanted to buy an aftermarket one but all i can find is one for a manual and i wanted to make sure it would work... so you are saying that it will right? do you have a link to one or a brand name or anything...

i will look for the post from further back too! thanks

 

HY35's and HX35's are 100% interchangeable. I did the swap this spring and noticed a difference right away. You can watch the For Sale Forum, or post something in the Wanted section as well.

---AutoMerged DoublePost---

Found it!
https://www.dieselbombers.com/24-val...fferences.html

 

thanks for all your help!

just 1 more question - from the pics it looks like you swapped out the turbo also - is this correct?

 

I swapped the complete turbo, wastegate and all. You can generally find HX35's for the $300 range. I paid $250, I think, for mine.

 

Still need an actuator and linkage? I have one available.

 

hey guys didnt know all that i gotta 01 auto and i ordered a banks waste gate 2 days ago from the states (iam in newfoundland canada) and now i reallly gotta find a cheap way to to get my power back my trucks showin codes po234 and po 1693 help would be awesome or anywhere i could get cheap (free hahaha) partss any help would be awesome the waste gate is on its wayy

 

You have an over boost code. Without a fooler or programmer the ECU will cut back fuel at 25PSI.

 

soo how do i fix it the trucks completly stock except for a 4 inch exhaustt i really need help guys