DobermanDiesels |
04-03-2010 04:59 PM |
another trans problem
so i hooked up my 18ft trailer with two 200o pound mowers on it went out worked and went home droped trailer and went out to dinner, the next day i was to demo a new scag so i hooked my trailer back up unloaded and drove around 20 miles got off the highway and got on a road with about 10 stoplights at the first light i came to a stop at red and on the change to green i feathered the pedal and here is what happened. and this is the 4 speed over drive in my 01 2500 it would not shift out of 1st i drove for a little bit a let off the gas all together and when i pushed the pedal back down and it shifted into 2nd now all my other gears are crisp and firm no slipping drives like a dream its just 1st-2nd but one it does go into 2nd it likes to pop back into first until i get her rolling with some speed i checked my fluid and its good but i am going to change it and the filter and i was also thinking about adjusting the front band but should i just take it to my mechanic and let him scan it, its not showing any codes on the key switch trick and i dont want to waste money on fluid twice so has anyone had this happen im sure someone has and due to the rest of the gearbox doing what it is suppose to as far as shifting it seems like this is something simple could it be a servo problem any help please it has never been driven hard i just pull a trailer here and there and it has never sliped or even given me the slightest wrong:argh:
---AutoMerged DoublePost---
update i changed my filter and fluid but decided not to try to adjust the bands i just don't want to wreck my trans so im gonna take it my my local diesel transmission specialist monday but if anybody has any idea of what this might be so i can get a dollar figure in my head i checked all my grounds re installed programming on my quad box and even took it off all together just to make sure, after i change the filter and fluid it shifts through 2-4 like butter but it was crisp before i changed it so im wondering if there is a servo causing it to stay in first and then pop back and forth once it does change like i said i can let off the throttle and feather it into 2nd but it then pops back to first so i have to repeat until i get some speed up come on everybody someone must know what gremlin this is:argh:
|