Check out this website I am looking for some intercooler hose and I came across this web site what do you guys think?

Silicone 45

 

they look pretty good i dont know about that working pressure being 50psi the burst psi is ok but if your running more than 50 it will prolly put alot of stress on it

 

well you know you get what you pay for. I went MR BOB'S due to the fact the handle abuse. Not cheap but as I was told if it blows a boot it wasn't re-torqued, or had oil on it. I know guys putting over 120 to them with no blown boots

 

Seems to me like it might work fine for those of us that are not dropping a bunch of money into our trucks. Thanks for the info about site.

 

IIRC it isn't a straight 3" 45* boot, one side is smaller than 3".....

 

i sell bd boots.

 

50lb working pressure 200lb burst pressure sounds good to me. Nice find man thanks for the post.

 

So does anybody know the correct sizes for the two lower 45* boots?

 

when i get home this weekend i can measure mine. IIRC it is either 3" on one end and 2.75" on the other or 3" and 3.25"..... can't quite remember but i do know it is not the same on both sides.....

 

here are the "Peak Diesel Performance" intercooler boots, notice the angled ones,



the one from the link above.