i need help with my 4wheel drive
 

When i bought my truck the 4 wheel drive was not working and i want to get it working. When i put it 4 wheel drive the front drive shaft will spin, but no lights come on and the front tires dont move, there are 2 vacuum hoses not hooked up and i dont know where they go. Does someone have or can someone take pics of their 4 wheel drive wiring diaghram or something to show me where the hoses hook up please



i have a 98.5 24 valve

i dont have any pics but i think they go from the top of the trans and i know they will go to the front locking actuator on the passenger side of the axel but i think they run to the top of the trans i havnt really looked but thats your problem your not getting that vacume to lock the front axel

i know thats the problem but i dont where to hook them up under the hood

oh ok But i dont think that they go under the hood they run back to the top of the trans

I will look at it thanks and any others who might have pics might help a little

come on guys chime in here

is it only un hooked at the axle or both ends

Here some pics.There a little dark because its night time and cold.Hope this helps:tu:

hope this helps.

Diagnosing 4WD Engagement Problems on Dodge Ram pickups