lilcowboy23 |
12-12-2009 08:53 PM |
maybe ECM problem nor sure? HELP
well as some of ya'll probably know my engine fried here a while back and had to be completely rebuilt cylinders where bored over and the cam line bored out and a helix cam installed, a super B single turbo was also installed and new 4in exhuast from turbo back. All this done by a shop as truck was under warranty. I went to pick up my truck today and he had some good news and bad news. Good news everything back in and it cranks and runs bad news is when it was all back together yesterday they cranked it up and let it sit and idle after 30 minutes or so the engine just started running away like someone geting on the pedal and back off again. they killed the engine and started trouble shooting. after finding nuthing they switched out the ECM with one from another truck and it didn't do it again. question here is it possible that the ECM would cuase this to happen or could it be the VP would like to spend the money the right way instead of just replaceing parts. no codes where set other then VIN doesn't match becuase of the different ECM. also they are thinking that when the journal that had to be bored and bearing installed for the call was right where the ECM is. is it possible that the heat fried the ECM. thanks
|