Diesel Bombers
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   Rear Main Seal leak (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/35037-rear-main-seal-leak.html)

12vcummins96 10-28-2009 01:01 PM
drop the tranny its easy

snowboard3r411 03-05-2011 09:53 PM
wheres the best place to get a oil pan gasket and a rear main seal kit anyone??

oudive 03-05-2011 10:46 PM
leak
 
Originally Posted by 99bomber (Post 419568)
So if I find out it is the oilpan leaking can I remove the pan without lifting and blocking the motor?
99bomber,

If it is the oil pan leaking, I have heard and read a post where someone cut the cross member, removed the pan and did the repair, installed the pan and welded the member back in place. Needless to say, I needed to replace the oil pan gasket. So I lifted the motor just enough to get the pan out. It is not difficult, but yet it was a minor PITA. I just got the gasket from Advance autostore, there is a TSB that says to add RTV to the back portion of the pan. Can't remember the number of the TSB. The rear main seal, well I had mine replaced when my tranny was being rebuilt. Hope this all helps.

oudive


All times are GMT -5. The time now is 07:49 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands