fueling
 

the other day i turned the quad. adr. up to Powerlevel 8 and the truck started to pop. i have the quadzilla Adr. AFe air intake, raptor fuel pump, BD intake elbow, 64mm turbo, 200hp injectors. is this a common problem for this pump. i think the pump can't supply the engine with enough fuel.....but i dont know...what do you guys think?:humm:

whats your fuel pressure during this?

Suspect low fuel pressure. If you dont have a fuel pressure guage - you need to put one in !!

What Tune are you running on the Adrenaline?

I dont think your raptor is keeping up with your mods bud.200 hp 64 mm Adr. Seems to be to much for the raptor.Stock line feeding the VP44 huh?Need a fuel pressure gauge.Remember when you add mods you not only need pressure but volume to. pressure of fuel and volume to.justs my experience with race cars.Get a fuel pressue reading.

If he bumps the pressure up on the Raptor it can support those mods. But we need to know his fuel pressure and what tune he is running.

i have a fuel pressure gauge but its broke, i orderd a new one. comp tunes on the adr box. i bought an Airdog 150 and that comes with the 1/2 inch lines today installing it tomorrow. the raptor pump was used when i bought it off a friend.

You could have been fine with the Raptor as long as it was still working correctly. Are you using a Pulse Monitor on the Adrenaline?

no its just the control pod.

well looks like you guy got this one under control:U:

put the airdog on and it runs just fine...all the way up to powerlevel 10...works just fine..took along time to install but finely got the system running.:bombin:

:U:

Mod away my friend,now you dont have to worry.:U:

get a fuel pressure gauge on and also might want to invest in the pulse :w2:

your only getting half of what you could get out of the adrenaline without the pulse

iv bought the pulse before and the screen cracked both times. i like that screen but its more a problem than anything else. but really like the set-up i have now.

Run the TORQ tune it is awesome, you can fog out the highway with not trouble
Stock turbo and injectors make 47PSi boost

Wow and that HX35 didn't come out the tail pipe under 47psi? :humm:

What settings are you using on the Pulse?

No the HX35 stays together somehow. I run PL6 driving around and PL10 for fun.

JDpwr isnt kiddin his cummins moves and there is black smoke ive seen it at 47psi its crazy

Anything over about 33-35psi and you just pushing hot air and high drive pressure.

:pca1: Lukes right...No power there

On the TQ Tune I can hit 45psi easy.

Yeah thats what i have read before. I usually dont run it that hard but it will get there. What are the stock gaskets and bolts good for? 40-45?

45psi is fine, but it's not boost that kills gaskets. Its timing and high drive pressure.....and you've got alot of both! you too LUKE!!!! lol

I know I like to live on the Wild Side. lol lol lol

Before I put in the boost elbow I could hit 33 or so and with the elbow ive hit 47 a few times. No one really makes a good adjustable elbow anymore. Guess its just time for a Turbo.


Luke

Same here. I just havent found one that i really liked yet.:humm:

We can still get the adjustables from II i think.

I believe the only one that makes a true adjustable one is from TST.

I can make some with pipe fittings if you like :)

TST is ajustible but not a very fine adjustment