Exhaust manifold!
 

So i was replacing the air filter today and came across 4 separate cracks in the exhaust manifold. I am going to replace it. Should i go with the stock one, or is there a good aftermarket one out the i might gain a few ponies with.

Thanks Brad

If you want a stock one - buy me an ATS or HTT manfold and Ill send you mine...:w2:

Dont waste your money on a stock one - it will just crack again.

X2 here.Give you mine for free.

I just don't have 450 to spend right now on one. Can i just leaved the cracked one on. Will it hurt anything? If not i might have to take you up on your offer turbo20 psi.

Thanks brad

i might be buying one before winter hits

DO NOT RUN THE TRUCK WITH A CRACKED MANIFOLD...If the manifold is cracked to the point of leaking high egts, low boost and poor performance come along with it. You can get one hot enough with the manifold leaking (large leak) to cause serious engine damage!

You pay shipping man I will send it your way the manifold has 72,000 miles on it no cracks.Its off the 01.

Ok i will take it turbo20psi. Just let me know how much you want for shipping and i can send it paypal.I now know why power level 2 and 10 feel the same. Why my egts are 1000 one the highway and why the black smoke does not roll out as good. I am just going to have to take it easy on it since i need the truck.

i havent been on this sight real long but i think its great how people help out whith problems like this. Also i need a hx 40:ok1:

sorry i have a hy35:booo: