Oil Changes:

Oil & Filter Change on Ram/Cummins


Fuel filter changes:

24 Valve Fuel Filter Change

 

hey another question. i was wanting to get the boost gauge and the fuel pressure gauge, but i already have a egt and oil temp gauge on the pillar.

i was wanting to get the three place pillar pod. Is the oil temp important? should i get rid of it. or just relocate it at the bottom of the dash or something.

 

imo oil temp aint real important. egt, fuel, and boost are more important imo.

 

thats kinda what i thought, i probably relocate the oil temp the bottom of the dash. no reason to waste a good gauge.

 

Isspro Gauge Package #1 94-07 Cummins Diesel Dawgs Performance

 

i got my fuel pressure gauge and hooked it up yesterday, and also replaced my fuel filter while i was at it. On the gauge my fuel pressure is 10psi. and at WOT it is about 5-6psi.

The filter i used is a WIX filter. i know you dont use the wix oil filters, but are the fuel filters ok. I was wondering what kind of filter i shoud use or if this one is ok.

---AutoMerged DoublePost---

by the way the Isspro gauges are very nice!

 

At WOT 5 to 6 is on that line no less then that. No more mods are going to be added are they?They are nice gauges.Save up for a Airdog, Fass or a MITUSA pump then there is no problem with fuel pressure.Just my 2 cents.

 

what about the fuel filter? are the wix filters ok?

 

Never read on anything bad on wix.I used them for a while brought them in bulk no problems,change mine once a year cheap insurance.

 

I have 2001 dodge ram that giving me some problems between 40 & 50 miles an hour with down sifting then up shifting I check voltage on apps 5.0 vdc i reset it worked for about 2 to 3 weeks same thing all over again,I now replaced the apps and were back to the same problem again after 3 weeks. I am lost should i replce the ecm Thanks Duane Pf