Problems with 01
 

This has been going on for a while now ,thought I could fix it but. Here goes eng. is slugesh when shifting gears rpm drop like a rock,before you can shift from 3rd to 4th it has fallen all the way to idle.When coming to red light you kick it in neutral, rpm will fall below 600 then surge up and down a couple times if you have A/C on it will almost die. Put new APPS on yesterday no help, had eng. scanded and it says the cam sensor is not working so replaced, still says not working. Unpluged the Edge Ez and no help. Vp is about 2 years old and been running two stroke.

it could just be ur vp is taking a crap. but did after u fixed the cam position sensor it said it still wasnt working? if so one of the wires in between could be broke or cracked and grounding somehow not give it the proper reading

Wire is ok the best I can tell. Ran a continuety test and it is making a loop. I have spent so much time on this I am about to throw a VP44 at it.

well best of luck. to ya. thats really all i could think be wrong with it

just ppump it and not have to worry anymore

You got that right,I wish I had the money. There's a guy with a 01 and It looks tough.

I have seen a few. an 01 make 1000 on fuel and a 02 done up ppumps. If my vp dies it's going bye bye and hello ppump

any show and tell on p-pumpin an 01?:pca1:

they have converter kits for them, Ill see if i can get some pics.

Word,next time I change out a VP it will be with a P7100:c: