big programer starting problems??
:humm:i have a qaudzille adrenaline and when i oput it on my truck it takes almost 30 second or more before itll let me start it. and i took it off and put a smarty on to see if it wouldnt and it also takes forever to start. would anyont know what could be my problem
|
I think you've probably got a fuel leak.
Maybe you pushed a fuel line when you were standing on your head installing the Quad? |
i know thats not the problem cause when i took the qaudzilla off itd start just like normal.
|
Oh,my bad.
|
I don't under stand. What is it exactly doing? Cranking for 30 seconds or won't try to start for 30 seconds. do you have the Pulse too?
|
same problem with a torque dog
I could't start my ctd after using my torque dog. It won't set the timing back, only turns half a turn. I disconnect both batterys and reboot the computer, then it starts right up. I called bullydog and they said it was the connections. I tried cleaning them and didn't help. this thing is brand new out of box, but I can't find the receipt. So I guess I'M SCREWED. Im going to try dealing with them. It cost $549. thanks Frank:ouch:
|
Hmmm... I've heard of problems with some programmers...
But I would check your fuel system for fuel leaks and what your cranking pressure is... You'll see my first pass you see the pump fade out after I let off the key. (air in the line!) |
when i dont have a big power programer i wait a few seconds and start it. and everythings good. but if i put either a quadzilla or a smarty on it even with them on stock i have to wait atleast 30 seconds to start it.:humm: but i also have a 65 horse edge ez and its just like normal wait 2 to 3 seconds and starts right up.
|
All times are GMT -5. The time now is 02:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands