Heated Mirrors
#1
#3
If it's not the switch the grid behind the mirrors has to be replaced.
On the 06's it is
Turn the ignition off
Both outside review mirrors should be disconnected at this time.
Disconnect the TIPM C10 harness connector.
Measure the resistance between ground and the (C16) Heated Mirror
Control Output circuit at the TIPM C10 harness connector.
Sure the wiring is different on the 01's...but maybe it will get ya close.
On the 06's it is
Turn the ignition off
Both outside review mirrors should be disconnected at this time.
Disconnect the TIPM C10 harness connector.
Measure the resistance between ground and the (C16) Heated Mirror
Control Output circuit at the TIPM C10 harness connector.
Sure the wiring is different on the 01's...but maybe it will get ya close.
#4
#6
#7
#9