Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   24 Valve 2nd Gen Dodge Cummins 98.5-02 (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/)
-   -   Going to rebuiled front end (https://www.dieselbombers.com/24-valve-2nd-gen-dodge-cummins-98-5-02/131654-going-rebuiled-front-end.html)

mpcampers 09-18-2016 10:27 PM

Going to rebuiled front end
 
We are going to rebuild the front end, upper and lower, inter and outer, ball joints, and a couple others I cant think what they are called. there is only one or two parts that are good, I think it is better to replace them all, this is not 4X4..
I was told to use Moog parts, any Ideas or suggestions,,??

gh0stman 09-19-2016 04:18 AM

From what I have seen lately Moog's quality hasn't been there the last few years. When I redid mine I used the best available store brand they had. It tightened up the front end. Have you ever done it before on a 2WD? Its doable but getting the rivets out is the roughest part on the ball joints. Plan on a day just for them. The rest is as easy as any other vehicle.

mpcampers 09-19-2016 08:09 AM

thanks , No I have never done it, I am not doing it myself health will not let me. I have to pay to have it done, and he is insistent that it has to be moog parts. and it sucks, I can get the store brand cheep the moog not so much.. all most $800 for moog parts. but reading on here moog is the brand to use. it is just hard to understand the difference in the price and quality.. anyway thanks for the reply

Mike

NadirPoint 09-19-2016 09:13 AM

Moog BJ's on my '07 are going fine with 50k on them and counting.

mpcampers 09-27-2016 04:03 PM

looking for a call to take the truck in 1600.00 for parts and labor.. didn't think that was to bad all moog parts...!!!

gh0stman 09-28-2016 05:27 AM

Dang that's high. I did all mine for less than $350.

mpcampers 10-01-2016 01:05 PM

I could do it a lot cheaper if I was not using moog, but we tow a 40ft trailer and I would rather use the moog parts... and my mec. will not use anything else.. and other shops where asking 2200.00 and not replacing everything...

kerley 10-10-2016 07:59 PM

Either way sounds like you are getting ripped off. I would check with "RockAuto" for my parts. I recently had my Ford Crown Vic done and was quoted 1800.$ at a local mechanic shop [Labor and parts] I ordered parts from "RockAuto" and cost around 110. & including shipping, My mechanic installed them for 240.$.

gh0stman 10-11-2016 04:07 AM

I don't think they sell moog parts on rock auto. I think their big product is Dorman.

mpcampers 10-11-2016 08:22 AM

I checked all over for the moog parts you can't find them cheep, my granddaughter is getting me the parts at cost. she could get me the store brand for 107.00 for everything but my mic. told my if I put them in, I would have to take it some where else, he would not do it he don't trust them.so I trust hem and going with moog and he will stand behind his work..


All times are GMT -5. The time now is 06:41 PM.


© 2024 MH Sub I, LLC dba Internet Brands