98.5 cummins 64mm dtech?
 

I got a dtech 64mm turbo from a buddy and was thinking about putting it on my truck. I am runing the stock hx35 currently and can get 34lbs of boost max, any benifets of putting this on my truck? Thank u for any help

What size injectors are you currently running? If its the stock injectors it will be very laggy. A 64 out of the box is already laggy but without the fuel to push it it will take longer to spool.

It has stock injectors, if I want to run that turbo someday what size injectors would be the best for it? Or what can I do to not have the lag? My stock hx35 spools nice and quick but I want more boost and power. Thank u

Do you have the full specs of the turbo?

64/65/12
IMG_3772.jpeg

This might get you closer to the answer you are looking for.D-tech 64/65/12 - Dodge Cummins Diesel Forum

I basically got it for free and am getting the upgraded turbine shaft with the rebuild kit, I might try it when I do injectors, what size should I run to complement the turbo

I would run some 150hp. But I am not am expert in matching turbos or injectors. I would recommend calling the turbo manufacturer as well as a injector manufacturer. See if their recommendations are the same. That will get you the best answer.

150hp DFI injectors would work good with that Turbo setup. Let me know if I can help


Luke