Keep burning up lift pumps
 

Ok. Truck is a 02 3500 4x4 straight piped 4" edge juice with attitude pump not tapped. I bought the truck with no guage on it. I put a guage on it and lift pump was bad. Well it was an intank on. So i replaced it with block mounted one from abc. It put out about 12 pounds.i thought it was pump so i switched it out for another hoping for higher pressure but still about 12 pounds so i just rolled with it. Well right over 99 days i was sittin in truck and guage drops to 5 psi 1-2 at wot. So parked it and changed it next day with a 3rd brand new pump from abc. 12 pounds at idle. That one lasted from 11-24-14 to 1-17-15 not even two months. Just replaced it again from abc. Dont know what to do. Dont wana spend te cash on fass if its just gona burn it up i also took intank assembly out and its just got straight hose all the way tank. Put a inline filter inplace before pump when i replaced it the last time on 1-18-16 help me please

If it was an intank pump you will have to pump another intank pump to replace it. That could be some of your issues. Ive seen you posted this twice.

I took all the old intank pump assembly out including sock. An replaced it with piece of open hose. And ya sorry. Didnt think this one posted