raptor factory replacement pump not primed
 

Installed a new 100 gal raptor pump and can hear the pump run when bump start but no fuel coming out of the outlet side of the pump. Need help bad can't figure out why it won't pull fuel. The truck ran fine before I changed the pump

Did it have an in tank pump?

No I checked just block mounted lift pump

---AutoMerged DoublePost---

Any one know how to reprime the pump that's all it could be because it runs just no fuel movement

You don't have to prime a lift pump. Add a few gallons of fuel to the tank to make sure your fuel gauge didn't quit on you and try again. Also verify that the fuel lines are hooked up to the correct ports on the pump. Might even try reversing the fuel lines in case the in/out was mismarked. If it still don't pump then I'd say you have a bad pump or a blockage in the tank or line.