Should I change my head studs or head gasket now?
So I've got a edge juice/w attiude afe air cleaner wide open exhaust fass150 pump and 60 hp injectors on the way. I've gotten my boost up to 37 psi before. Should I be doing some head studs or a gasket now ? I should mention I have the HO motore (245 hp)
|
I would say go head studs, but if your going to be increasing the pressures, I would upgrade the head gasket and do both at the same time.
|
x2 for head studs if you do plan to go bigger later on. i wouldn't change the head gasket unless there is something wrong with it.
|
I would turn your boost down to 32psi and save your money for things that will make a better difference like better head lights. or a high idle switch.
|
Head studs is another way for someone to make money run it tell there's a problem
|
I set my boost down to 35
|
I agree turn boost to 32 save$$
|
All times are GMT -5. The time now is 08:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands