Need help priming
So just changed my fuel filter and can't get my truck primed to where it'll start. How can I get it primed enough to start? I've even dumped fuel in filter in hopes of it startin but just cranks. I need help asap
|
did you crack the lines going to the injectors and bump the ignition. also see if your lift pump is working as well
---AutoMerged DoublePost--- sorry crack the number 3 injector fuel line bump the ignition and then once you get fuel tighten it down and it should start |
I cracked the line going to the IP and bumped the Starter then re connected and sge fired right up.
Sent from my DROID RAZR using Tapatalk 2 |
Maybe for future reference: I drain and save the fuel from the filter housing. After reinstalling the filter housing with the new filter, I pour the fuel back into the top through one of the ports. Never had a problem starting my truck when changing the filter this way.
Sent from my GT-P5113 using Tapatalk 4 |
All times are GMT -5. The time now is 04:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands