battery draining problems
Hello everyone. I put two batteries in my truck four months a part from and then would let the truck sit for a week and it wouldn't turn over so i had the alternator tested and it pass so then i did the volt meter test and found that something was pulling almost one amp when it was off and found that the guy that i bought it from had wired the light switch for the offroad lights wrong and it sorted out, so i fix that and something is still pulling power and the positive terminal on the driverside battery corroed in less then three weeks. SOOOO any ideas :humm: ?????
|
Put you meter back on to measure the draw. Start pulling fuses until the draw goes away. Whatever fuse makes it drop off will have the draw.
|
Ok ill try that thank you :tu:
|
Ok I think I found my draw but Im not sure can the power in-line to the PDC cause the draw because the nut and bolt that hold the wire tight is stripped and looses up. Now when I let it sit and try to start it, it will click and loses power and when it clicks the positive battery hook up on the driver side will smoke for a sec then stop :humm:
---AutoMerged DoublePost--- http://i32.photobucket.com/albums/d3/smourj21/4ec00c16-1.jpgThis is what im talking about the bolt that goes through the power inline on the right part of the pic is want is getting loose |
All times are GMT -5. The time now is 01:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands